Ni Direct Injector Driver System Interface - National Instruments NI DIDS-2103 User Manual

4. NI Direct Injector Driver System Interface

The main user interface window contains a list of all setup windows used to configure the various DI Driver System
functions. Double-clicking on a setup window name will open the window and make the listed name bold. Multiple
setup windows may be open simultaneously. Pressing the X in the upper right corner of each window will close the
window. Also, double clicking the bolded window name within the main window list will close the window. A single
click of a bolded window name will bring the selected window to the top with focus. Pressing the X in the upper right
rd
corner of the main user interface window, or pressing the red square button in the SCM console (3 from left)
will close all open setup windows and stop user interface communications with the DI Driver System. However, the
system will still continue to operate according to the most recent user interface settings. The user interface can be
started again by pressing the green run button within the SCM console.
NI DIDS-2100 Series User Manual | © National Instruments | 59