C-Series Module Slot Assignments - National Instruments NI DIDS-2103 User Manual

3.3.1 C-Series Module Slot Assignments

NI DIDS-2103, NI DIDS-2106, NI DIDS-2109, and NI DIDS-2112 (3-, 6-, 9- and 12-
Channel Direct Injector Driver Systems)
The NI DIDS-2103, NI DIDS-2106, NI DIDS-2109, and NI DIDS-2112 DI Driver Systems include a cRIO-9066.
The slot assignments for the all those DI Driver Systems are shown in figure 3.3.1. It is possible to upgrade an NI
DI-2100 series Driver System by adding NI 9760 and NI 9751 DI Driver modules. System I/O may be expanded with
optional NI 9201 and NI 9758 (PFI Driver) modules (purchased separately). For more information on the hardware
included see, What Is Included. The DI Driver System software can only communicate with the modules when they
are in their assigned slots as shown in figure 3.3.1.
The NI 9411 and NI 9760 modules can communicate with the any of the DI Driver modules in their appropriate slots.
For example, the NI 9411 module in Slot 1 has the ability to communicate digital input signals to any of the NI 9751
DI Drivers in Slots 2, 3, 5 or 6. Please note the nomenclature of the DI Drivers and their corresponding slots, as this
is the identification used in the application interface.
Figure 3.3.1, 3-, 6-, 9-, and 12-Ch DI Driver System Configuration With Optional NI 9201 and PFI Driver
*The NI 9201 and NI 9758 (PFI Driver) modules are optional modules that may be purchased separately. For more
information on the functionalities of these modules please see Using The DI Driver System to Control Fuel Pressure.
NI DIDS-2100 Series User Manual | © National Instruments | 41