Tdc Channel Mapping Tab - National Instruments NI DIDS-2103 User Manual

GlobalTDCOffset
Tip Strip: Global TDC offset between absolute 0 and TDC1
Units: CAD
Detail: Crank angle degrees between the EPT absolute zero position and TDC1. When TDC1 is before EPT
absolute zero position, then
then GlobalTDCOffset
130 | ni.com | NI DIDS-2100 Series User Manual

4.6.2 TDC Channel Mapping Tab

GlobalTDCOffset
is positive. The absolute zero position is specific to the
is negative. When TDC1 is after EPT absolute zero position,
EPT pattern type.