The direct mapping feature allows users to directly map DI Driver System inputs and
Parameters. The input values correspond to the input parameter as specified in DirectMap_X_InputSelector. The
direct mapping output is routed to the Flex Control Parameters selected in DirectMap_X_FlexControlParameters.
The Flex Control Parameters are a list of many controls from the various setup windows of the DI Driver System.
When a Flex Control Parameter is selected here, the value from the lookup table output will overwrite that parameter.
The table is only active when it is enabled via
Enable DirectMap_X
Tip Strip: Enables DirectMap_X
Detail: When ON the direct mapping is enabled and the selected Flex Control Parameters will be overwritten
by the direct mapping input.
4.8 Direct Mapping
Enable DirectMap_X
User Variables
button.
NI DIDS-2100 Series User Manual | © National Instruments | 143
to Flex Control