Disconnecting/Connecting Fine-Wire Coaxial Cable - Sony PDW-U4 Service Manual

Type D
Locking tab
90˚
Connector
Type E
Connector
Flexible cable
Disconnecting
1. Turn off the power.
2. Slide or lift up the locking tab in the direction of the arrow to unlock and pull out the flexible cable.
Connecting
1. Slide or lift up the locking tab in the direction of the arrow and securely insert the flexible cable into
the deep end of the connector.
2. Return the locking tab to its original position and lock the connector.

1-12-2. Disconnecting/Connecting Fine-Wire Coaxial Cable

Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull
the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is free from dirt or dust.
Flexible cable
(Upper and lower both sides
are conductive surface.)
Locking tab
Conductive surface
Angle of locking tab and
angle of connecting-disconnecting flexible cable
Locking tab
90˚
0˚ to 20˚
Flexible cable
Angle of locking tab and
angle of connecting-disconnecting flexible cable
Locking tab
0˚
Flexible cable
17