Connecting The Drive Unit - Sony DDU100E User Manual

Connecting the Drive Unit

DC INPUT connector
Connect the drive unit to the computer with the following
connectors:
• DC INPUT connector
• F. GND tab (unless the frame of the drive unit is in direct contact
with the computer's chassis).
• AUDIO OUT connector (if you plan to connect audio equipment)
• INTERFACE CONNECTOR.
The pin assignment is as follows.
+5 V DC
After matching the beveled edges, insert the plug of the power
supply cable to the DC INPUT connector and push it firmly in place.
Caution: Improper connection may damage the drive unit and void
the warranty.
Power supply cable
(4-pin connection cable)
F. GND tab
AUDIO
OUT
connector
GND
DC INPUT connector
Installing the Drive Unit in Your Computer
INTERFACE CONNECTOR
DC INPUT
connector
GND
+12 V DC
17