Table of Contents
Advertisement
9. Install the removed parts by reversing the steps of removal.
Note
•
When installing the loader assembly, install it with the loader assembly roller set on the plate.
•
When installing the loader assembly, fit the two pins with the two holes in the loader assembly.
Roller
Pin
Roller
Plate
•
The front brush of the loader assembly (RP) for replacement is fixed with protection tape. Before
installing the loader assembly (RP), be sure to remove the protection tape. Gently remove the tape
so as not to damage the brush holder.
Brush
Protection tape
Holes
Plate
Loader assembly (RP)
Loader assembly
Hole
Pin
Loader assembly
Pin
72
Advertisement
Table of Contents
