Table of Contents
Advertisement
2. If the connector (CN35) on the LDR-35 board is hidden behind the bracket, insert the screwdriver
into the hole of the front assembly, move the ME ratchet back and forth so that the connector (CN35)
on the LDR-35 board becomes visible.
3. Disconnect the FPC SE1004-LDR35 from the connector (CN35) on the LDR-35 board.
Note
•
Carefully open or close the locking tab of connector (CN35) because it is likely to be damaged.
•
If the FPC SE1004-LDR35 is disconnected from the connector (CN35) on the SE-1004A board
with the connector (CN35) on the LDR-35 board connected, the connector (CN35) on the
LDR-35 board may be damaged. Do not disconnect the FPC SE1004-LDR35 from the connector
(CN35) on the SE-1004A board.
LDR-35 board invisible
LDR-35 board
FPC SE1004-LDR35
LDR-35 board visible
LDR-35 board
FPC SE1004-LDR35
Locking tab
CN35
(LDR-35 board)
(Type D)
FPC SE1004-LDR35
Bracket
Bracket
Do not disconnect from the connector
on the SE-1004A board.
CN35
(LDR-35 board)
CN35
FPC SE1004-LDR35
(SE-1004A board)
ME ratchet
Hole
Screwdriver
70
Advertisement
Table of Contents
