Table of Contents
Advertisement
Startup procedure
1. Connect the PC to the unit with the supplied USB cable.
2. Turn on the unit.
3. If a cartridge is remaining in the unit, remove it with the EJECT button.
4. Open My Computer of the PC and check drive name of the unit.
Tip
In the case of the following window, the drive name is removable disk (E:).
5. Open the [PDWTerminal.ini] file in the [PDW-U1 Service Software] folder by Notepad or similar.
6. Change the underlined part to the drive name checked in step 4.
[FORM]
LEFT=32
TOP=189
[PDW]
DRIVE=E
Drive name of PDW-U4
VERSION=1.00
7. Save the [PDWTerminal.ini] file and close it.
108
Advertisement
Table of Contents
