Table of Contents
Advertisement
2. Remove the eight screws (M2 x 2.7), and then remove the two U cases.
3. Remove the screw (M2 x 2.7) and release the two hooks, and then remove the front panel assembly.
Note
•
Pushing the screws in the front panel assembly may deform the front frame.
•
Two U cases are in the same shape.
Special head screws (M2 x 2.7)
Pushing the screws in the front panel
assembly may deform the front frame.
Special head screw
Front panel assembly
Hook
Arrow view B
Projections
Front panel assembly
Special head screws
(M2 x 2.7)
Note
When attaching the U case, observe the following instructions.
•
Check that the projections of the front panel assembly and the rear panel are visible from the
holes of the U case.
•
Tighten screws (a) to (h) sequentially in alphabetical order.
4. Install the removed parts by reversing the steps of removal.
(d)
Holes
(M2 x 2.7)
Projections
Hook
B
(a)
Holes
U case
(b)
Holes
Projections
(e)
A
(c)
Holes
(h)
U case
Special head screws
(M2 x 2.7)
(g)
Rear panel
Arrow view A
Projections
Rear panel
(f)
Special head screws
(M2 x 2.7)
67
Advertisement
Table of Contents
