Adjusting The Anti-Scalp Rollers - Toro Z Master Professional 7000 Series Operator's Manual

Figure 33
1. Anti-scalp roller
2. Spacer
3. Bushing
Adjusting the Anti-Scalp
Rollers
For Machines with Rear Discharge
Whenever you change the height of cut, it is
recommended to adjust the height of the anti-scalp
rollers.
1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Adjust the anti-scalp rollers as shown in
34 and Figure 35.
g029957
4. Flange nut
5. Bolt
Figure
1. Flange nut
2. Anti-scalp roller
1. Bolt
2. Bushing
31
Figure 34
3. Bushing
4. Bolt
Figure 35
3. Anti-scalp roller
4. Flange nut
g024242
g024243