Servicing The Engine Oil - Toro Z Master Professional 7000 Series Operator's Manual

Riding mower with 132cm or 152cm turbo force mower
Hide thumbs Also See for Z Master Professional 7000 Series:
Table of Contents

Advertisement

Figure 59
1. Air-filter body
2. Air filter

Servicing the Engine Oil

Engine-Oil Specifications
Oil Type: High-quality detergent oil classified API
Service CJ-4 or higher for diesel engines. Do not use
special additives with recommended oils.
Crankcase Capacity: 3.7 L (3.9 US qt)
Viscosity: See the table below.
g001048
3. Air-cleaner cover
4. Latches
Preparing to Service the Engine
Oil
Important:
The fasteners for the front engine
panel are designed to remain on the machine after
cover removal. Loosen all of the fasteners a few
turns so that the panel is loose but still attached,
then go back and loosen them until the panel
comes free. This prevents you from accidentally
stripping the bolts free of the retainers.
Tilt the seat forward, loosen the bolts holding the front
engine panel and remove it
1. Bolt
Note:
After servicing the engine oil, install the engine
panel and tilt the seat into its upright position.
47
Figure 60
(Figure
61).
Figure 61
2. Front engine panel
g001061
g012347

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74264te74265te74279te

Table of Contents