Positioning The Seat; Unlatching The Seat; Changing The Seat Suspension - Toro Z Master Professional 7000 Series Operator's Manual

operate as described below, have an Authorized
Service Dealer repair the safety system immediately.
1. Sitting on the seat, engage the parking brake
and move the blade-control switch (PTO) to the
O position. Try starting the engine; the engine
N
should not start.
2. Sitting on the seat, engage the parking brake
and move the blade-control switch (PTO) to the
O position. Move either motion-control lever
FF
(out of the N
EUTRAL
the engine; the engine should not start. Repeat
for the other control lever.
3. Sitting on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, disengage
the parking brake, engage the blade-control
switch (PTO), and rise slightly from the seat; the
engine should shut off.
4. Sitting on the seat, engage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine. While the engine is running, center
either motion control and move (forward or
reverse); the engine should shut off. Repeat for
other motion control.
5. Sitting on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine; the engine should not start.

Positioning the Seat

The seat moves forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
To adjust, move the lever sideways to unlock the seat
(Figure 13).
Figure 13
- position). Try starting
LOCK
position. Now start the
position. Now start the
position. Try starting the

Unlatching the Seat

1. Move the seat to the most rearward position.
Note:
This prevents interference when you
raise the seat.
2. Push the seat latch rearward to unlatch the seat.
3. Raise the seat up
Note:
This allows access to the machine under
the seat.
FF
FF
1. Seat latch
2. Fuel cap
Changing the Seat
FF
Suspension
The seat is adjustable to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort
g019754
1. Seat-suspension knob
22
(Figure 14).
Figure 14
3. Seat
(Figure 15).
Figure 15
g000950
g019768