Manual Menu: Overr On - Theben SELEKTA top2 Series Manual

The display now returns to auto mode.
Note: If PERM ON permanent switching is activated and the MANUAL menu is called up again, END
PERM ON appears.

10.2. MANUAL menu: Overr ON

Note: If HOLIDAY is active, manual switching is no longer available during this time.
MENU/"PROGRAM"/►2x/OK/►2x/"OVERR ON"/OK
Press the MENU button to open the main menu from auto mode.
Press button ► twice and confirm the MANUAL menu by pressing OK.
Use button ► to select the desired channel, then press OK (only for 2-channel
devices).
Press button ► twice. OVERR ON or OVERR OFF is shown (depending on which
switching status is currently active in auto mode).
With the OK button you can confirm the respective display statement.
If OVERRIDE has been entered and the MANUAL menu is called up again, the display shows END
OVERRIDE.
If PERMANENT has been entered, no manual switching can be performed (priorities!), i.e. permanent
switching must be ended first.
Response: With permanent switching active, OVERRIDE can indeed be selected in the MANUAL
menu. However, when this is confirmed with the OK button, an abort occurs and the system returns to
the PERMANENT END menu item.
Page | 57