Advertisement
Switch Permanent ON / OFF
MENU
u
MANUAL
PERM ON
PERM OFF
OVERRI ON
TIMER
HOLIDAY
Press MENU.
†
Select MANUAL and press OK to confirm.
†
Select PERM ON or PERM OFF and press OK to confirm.
†
Setting holiday function
MENU
u
MANUAL
PERM ON
PERM OFF
OVERR ON
TIMER
HOLIDAY
Press MENU.
†
Select MANUAL and press OK to confirm.
†
Select HOLIDAY and press OK to confirm.
†
Select ON and press OK to confirm.
†
Select START HOLIDAY and press OK to confirm.
†
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm.
†
Select END HOLIDAY and press OK to confirm.
†
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm.
†
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•
Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•
Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
END
ON
u
END
BEGIN HOLIDAY
END HOLIDAY
Activating manual control
Briefly press both buttons simultaneously.
†
Activating permanent switching
Press both buttons simultaneously for 2 seconds.
†
Cancelling manual/permanent switching
Press both buttons simultaneously.
†
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service
†
(e.g. to 10,000 h)
Using Bluetooth OBELISK top3
All functions can also be transferred to the time switch using
the Bluetooth OBELISK top3 memory card (9070130).
IP 40
9070130
Copying OBELISK → TIME SWITCH
This copies the switching program and optionally all time
switch settings (e.g. time format etc.) from the memory card
in the time switch.
Copying TIME SWITCH → OBELISK
This copies all switch programmes and settings from the time
switch to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
ok
4
Advertisement
