Hour Counter: Operating Hours Service - Theben SELEKTA top2 Series Manual

11.1.3. HOUR COUNTER: Operating hours service

Operating hours service is used to better track and monitor operating hours (to establish maintenance
intervals).
In the Service sub-menu, an hour quantity can be entered manually as well (max. 199,999 hours,
typing in the relevant digits individually).
Should the operating hours exceed the set value, SERVICE is shown in auto mode.
When SERVICE is displayed, you can
- Delete the operating hours.
- Increase the hours in the Service sub-menu.
If the value has been set to 000,000 hours, SERVICE is deactivated.
Entering the service interval:
(MENUOPTIONSHOUR COUNTER)
Press button ► twice to change to the SERVICE menu.
Press OK to confirm.
Use button ► to select the desired channel, then press OK (only for 2-channel devices).
The first digit flashes. Use button ► to select the number 0 for a service interval of
fewer than 100,000 hours or 1 for 100,000 or more hours.
Continue by pressing OK. The second digit flashes. Use button ► to select 0 – 9, then
press OK.
The other digits are set in the same way, until the number of service operating hours has been entered
in full.
After the last digit is confirmed with the OK button, the system returns to SERVICE and the input is
saved.
Example:
In the case of channel C1, upon reaching 190,000 operating hours, SERVICE is shown
in the text line in auto mode.
Page | 63