Theben SELEKTA top2 Series Manual page 15

The date format currently displayed (in this case, European format) is shown
using the example date 31.12.2000. The date format can be changed with the
buttons ◄ and ► if required. Then confirm the desired setting with OK.
Note: If an external DCF or GPS antenna is connected (only possible with SELEKTA 171 top2 RC),
time synchronisation is performed. The exact local time is calculated in the time switch automatically
according to the set time zone. Therefore, the following settings relating to time and date do not have
to be made if a top2 RC DCF or GPS antenna is connected correctly.
Either confirm with OK or modify the year (flashing) with the arrow buttons and
then confirm by pressing OK.
Either confirm with OK or modify the month (flashing) with the arrow buttons and
then confirm by pressing OK.
Either confirm with OK or modify the day (flashing) with the arrow buttons and
then confirm by pressing OK.
Press OK to confirm.
Either confirm with OK or modify the time format with the arrow buttons and then
confirm by pressing OK.
Page | 15