Setting Holiday Function; Time Signal Can Be Received With Appropriate Top3 Rc Antenna (Only With Tr 611 Top3 Rc); Activating Pin Code; Setting Manual Control Or Permanent Switching - Theben TR 611 top3 Quick Start Manual

Setting holiday function

MENU
MANUAL
CHANNEL C1
PERM ON
PERM OFF
OVERR ON
TIMER
ON
HOLIDAY u
BEGIN
RANDOM
HOLIDAY
END
END
HOLIDAY
Press MENU.
†
Select MANUAL, confirm with OK.
†
Select CHANNEL C1 or C2, confirm with OK.
†
Select HOLIDAY, confirm with OK.
†
Select ON, confirm with OK.
†
Select BEGIN HOLIDAY, confirm with OK.
†
Enter YEAR, MONTH, DAY, HOUR, confirm with OK.
†
Select END HOLIDAY, confirm with OK.
†
Enter YEAR, MONTH, DAY, HOUR, confirm with OK.
†

Activating PIN code

The PIN code is set in OPTIONS via the menu.
L If you have forgotten your PIN, please call the Theben
Hotline.
L Have the serial number ready.
MENU
OPTIONS
OPERATING
HOURS
METER
EXT INPUT
CHANNEL
COMBINATION
LCD
ILLUMINATION
LANGUAGE
u
PIN NO PIN
FACTORY
WITH PIN
SETTINGS
INFO
END
CURRENT
u
NEW PIN
00 00
Time signal can be received with appropriate
top3 RC antenna (only with TR 611 top3 RC)
L Refer to operating instructions 310336 when connecting a
GPS antenna (9070610).
L Follow the advice in the top3 RC-DCF antenna operating
instructions.
L Connection to the top3 RC-DCF antenna allows the time
switch to be automatically synchronised via DCF signal.
L After connecting to the power supply or resetting, the
automatic display appears as soon as the DCF transmis-
sion signal has been received.
Adjusting of time zones
After successful synchronisation, the time zone can be altered
in the TIME/DATE menu option.
In the TIME menu (display: MODIFY HOUR) correct the
†
applicable local time (time zone).
Ext L
0 6 12
Receiving the
transmission
signal
MENU
1 2 3
C1

Setting manual control or permanent switching

Manual control or permanent switching can be set via the
menu in MANUAL or (in the automatic display) by button
combination (see picture).
•
Manual control:
Reversing the channel status until the next automatic or
programmed switch.
•
Permanent switching:
As long as permanent switching (on or off) is activated,
the programmed switching times are ineffective.
Channel
C1
Activating manual control
Briefly press both buttons simultaneously.
†
Activating permanent switching
Press both buttons simultaneously for 2 s.
†
Cancelling manual control/permanent switching
Press both buttons simultaneously.
†
N
Data
18 24
OK
max.100 m
110-230V~
50-60Hz
R 10a - 30T
16(10)A 250V~
Channel
C2
ok
6