App Functions; Setting A Project Weekly Program - Theben SELEKTA top2 Series Manual

13.5 App functions

Projects:

Create a new project

Edit existing projects on the mobile device

Duplicate existing projects on the mobile device

Transfer existing projects from the mobile device to the time switch

Transfer existing projects from the time switch to the mobile device

Send projects from the mobile device via e-mail

Import/open projects from an e-mail attachment

Save or load projects to a cloud
Direct commands/Device status:

Send time and date to the device

Execute manual switch command

Enter/delete holiday program

Read out operating hours

13.5.1 Setting a project weekly program

A project always consists of a program (e.g. Monday to Friday, 8:00 AM ON and 8:00 PM OFF) and
device settings.
All data (program + device settings = project) can be transferred simultaneously. It is also possible to
transfer just the program or just the settings. Check this in the app before starting the data exchange.
A project is always intended for a specific device type (e.g. switching program for
SELEKTA 174 top3) and can only be transferred to that same device type too.
! If a device is locked with a PIM code, this is requested before the data is transferred.
Any switch-on and switch-off times you like can be defined for each day of the week. The switching
times are set to the minute (hh:mm) either via a list view or, alternatively, a graphical input interface,
similar to that found in the OBELISK PC software.
Page | 84