Theben SYN 161 h, SUL 181 h - Electromechanical Timer Manual

MOUNTING INSTRUCTIONS

Safety information: Electrical devices should only be connected and mounted by an electrical specialist. Manipulations and modifications on the switch will result in loss of warranty. The national specifications and applicable safety regulations must be observed.

Synchron
230 V / 50 Hz
Quartz * R = 3d (72h) LiMh
230 V / 45 – 60 Hz

*The quartz movement starts automatically after a few minutes by an applied voltage. The full power reserve is built up after about 3 days.

SETTING TIME

24 h Programm

Manual Control ON/OFF (Override Control)

Turn the control axis in direction of arrow by one notch; ON= or OFF = . The manual control is automatically annuled by the following counteracting command of the automatic program sequence.

Permanent Control ON/OFF

Set the hand lever to »perm« = permanent control; turning the control axis in direction of arrow, the required permanent control ON or OFF can now be adjusted. Turning the hand lever to »Auto« = Automatic Control, the permanent control is terminated. The actual switch position is maintained until the next counteracting command of the automatic program sequence is triggered. An immediate correction can be carried out by means of the manual control (override control).

Service

TIMEGUARD LTD,
Victory Park, 400 Edgware Road
London NW2 6ND
Tel. 0181/4508944;
Fax: 0181/4525143