What Does The Normal Obelisk Program Transfer; Ble Bluetooth Obelisk Top3 - Theben SELEKTA top2 Series Manual


A speech OBELISK only contains one language.

If a speech OBELISK is inserted into a TR top2/top3 time switch, the OBELISK menu appears.
The appropriate menu items are now COPY OBELISK  TIME SWITCH and END. In all other
cases, OBELISK ERROR is displayed.

After the copying procedure has been completed, the downloaded language is set as the
active language in the time switch.

If a language is copied into the time switch again, the last language to be downloaded is
overwritten.

If the OBELISK top2 is disconnected during the copying procedure, the re-loadable language
in the time switch is deleted for security reasons, since the copying procedure was not
complete.

By copying the program from the time switch to the OBELISK top2 (menu item COPY TIME
SWITCH  OBELISK), it is possible to overwrite the OBELISK language again and to
therefore generate an OBELISK program.

12.7. What does the normal OBELISK program transfer?


The OBELISK program for the SELEKTA 170 top2, SELEKTA 171 top2 RC and SELEKTA
172 top2 time switches can only transfer the saved switching programs (switching time, astro
times, special programs).

Not transferred: holiday program, language configuration, hour counter, external inputs, LCD
lighting setting, date format, summer/winter rule, etc.
13.

BLE Bluetooth OBELISK top3

Note: The BLE Bluetooth OBELISK top3 can only be used for devices from the OBELISK top3 range.
In mains mode
o
When the BLE OBELISK top3 is plugged in, the OBELISK menu opens and "BLUETOOTH" is
displayed. After 70 s with no BLE connection (no BLE status telegram with the message
"Connected"), the clock switches to auto mode.
o
Press a button to switch the clock back from auto mode to the "BLUETOOTH" display. If a
correct BLE connection code is received whilst the "BLUETOOTH" display is active,
"BLUETOOTH ACTIVE" stays displayed.
Page | 81