12.
OBELISK top2 memory card
All top2/top3 devices can be easily programmed using an OBELISK top2/top3 memory card and
OBELISK top2 PC software.
OBELISK top2 memory card
12.1. OBELISK top2 memory card in the time switch cover
The OBELISK top2 memory card can be stored ready-to-use in the time switch cover.
The time switch cover can be completely closed with an OBELISK top2 inserted, i.e. the time
switch can also be sealed with an OBELISK top2 inserted.
Note: The strap on the OBELISK top2 is suitable for removing with a screwdriver.
Tip for removing without a screwdriver: press the front part of the OBELISK top2 down and it
tilts, making it easier to remove.
12.2. OBELISK copying functions
OBELISK programs do not have to match the device type.
Examples:
o
OBELISK with SELEKTA 170 top2 program load into another SELEKTA 170 top2
possible
o
OBELISK with SELEKTA 171 top2 RC program load into SELEKTA 170 top2
not possible
o
OBELISK with SELEKTA 170 top2 program load into SELEKTA 172 top2 not
possible
As a result, no switching times are transferred either.
Page | 76