Manual Menu: Manual On; Manual Menu: Timer (Only For Tr 611 Top2, Tr 622 Top2) - Theben TR top2 Manual

11.2 MANUAL menu: MANUAL ON

Note: If HOLIDAY is active the manual switching is no longer available during this time.
With the MENU push button request the main menu from the auto mode.
Press the ► push button twice and confirm the MANUAL menu with the OK push button.
With the ◄ and ► push buttons select the desired channel and then press OK (only for
the 2-channel devices).
Press the ► push button twice. MANUAL ON or MANUAL OFF is shown (depending
which switching mode is currently active in the auto mode).
With the OK push button you can confirm the respective display statement.
If MANUAL is entered and the MANUAL menu is requested again the display shows END MANUAL.
If PERMANENT is entered no manual switching can be performed (priorities!), i.e. permanent switching
must be ended first.
Behaviour: With an active PERMANENT switching in the MANUAL menu MANUAL can indeed be
selected. If, however, confirmed with OK, an abort occurs with a return to the PERMANENT END menu
item.

11.3 MANUAL menu: TIMER (only for TR 611 top2, TR 622 top2)

For TIMER (hourglass sequence timer) the function TIMER ON or TIMER OFF is possible.
The maximum timer time which can be set is 23 hours 59 minutes (no seconds).
Caution: Permanent switchings have a higher priority than TIMER switchings.
With the MENU push button request the main menu from the auto mode.
Press the ► push button twice and confirm the MANUAL menu with the OK push button.
Select the required channel with push buttons ◄ and ►, then press the OK push button.
Page | 41