[Al. 581_Safety Communication Error 1 (Safety Sub-Function)] - Mitsubishi Electric MR-J5-G Series User Manual

[AL. 581_Safety communication error 1 (safety sub-function)]

• There is a problem with data reception in the safety communication.
[AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
Cause
1.
The safety communication settings of the
safety master station have been set
incorrectly.
2.
There is a problem on the safety master
station side.
3.
Take actions in accordance with the items shown below.
Page 85 [AL. 086.1_Network communication error 1]
[AL. 581.2_Safety communication error 1 - Receive data error A2 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.3_Safety communication error 1 - Receive data error A3 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.4_Safety communication error 1 - Receive data error A4 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.5_Safety communication error 1 - Receive data error A5 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.6_Safety communication error 1 - Receive data error A6 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.7_Safety communication error 1 - Receive data error A7 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.9_Safety communication error 1 - Receive data error B1 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.A_Safety communication error 1 - Receive data error B2 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.B_Safety communication error 1 - Receive data error B3 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.C_Safety communication error 1 - Receive data error B4 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.D_Safety communication error 1 - Receive data error B5 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
[AL. 581.E_Safety communication error 1 - Receive data error B6 (safety sub-function)]
Page 190 [AL. 581.1_Safety communication error 1 - Receive data error A1 (safety sub-function)]
1 SERVO AMPLIFIER TROUBLESHOOTING
190
1.3 Handling methods for alarms/warnings
Check/action method
Review the safety communication settings.
Refer to "Safety sub-function control by network" in the following manual.
MR-J5 User's Manual (Function)
Check if an alarm has occurred on the safety master station.
If an alarm has occurred, take actions in accordance with the troubleshooting
of the master station.
Model
[G]