[Al. 0Ec_Overload Warning 2] - Mitsubishi Electric MR-J5-G Series User Manual

[AL. 0EC_Overload warning 2]

• Operation was repeated with a high load ratio while the servo motor shaft was not rotating.
[AL. 0EC.1_Overload warning 2]
Cause
1.
The load is excessive or the capacity is
insufficient.
Check/action method
Reduce the load or replace the servo motor with a larger-capacity servo motor.
1 SERVO AMPLIFIER TROUBLESHOOTING
1.3 Handling methods for alarms/warnings
1
Model
[A]
[G]
[WG]
113