[Al. 5E1_Test Mode Setting Mismatch Warning (Safety Sub-Function)] - Mitsubishi Electric MR-J5-G Series User Manual

[AL. 5E1_Test mode setting mismatch warning (safety sub-
function)]
• The settings for the test mode are inconsistent.
[AL. 5E1.1_Test mode setting mismatch warning A (safety sub-function)]
Cause
1.
The test operation mode has been set
incorrectly.
[AL. 5E1.9_Test mode setting mismatch warning B (safety sub-function)]
Page 197 [AL. 5E1.1_Test mode setting mismatch warning A (safety sub-function)]
Check/action method
Check if the servo amplifier and [Pr. PSA01.1 Input mode selection] are both
set for test mode. If they do not match, review the settings.
1 SERVO AMPLIFIER TROUBLESHOOTING
1.3 Handling methods for alarms/warnings
1
Model
[G]
[WG]
197