Graco Pro Xp 60 WB Instructions Manual page 61

ES On On - - - Off Off and and Fluid Fluid Adjustment
ES ES On Off and Fluid
1. Follow the steps in
Prepare the Gun for Service, page
2. Loosen the captive screw (26p). Remove the
valve (26) from the handle.
3. Lubricate the o-rings (26b* and 26m*) with
non-silicone grease, Part No. 111265. Do not
over-lubricate.
Note
Do not over-lubricate parts. Excessive
lubricant on the o-rings can be pushed
into the gun air passage and blemish the
finish on the workpiece.
Figure 39 ES On-Off Valve Repair, 24N630 and
26A160
Figure 40 ES On-Off Valve Repair, 24N632
3A7504A
Adjustment Valve Valve Repair
Adjustment Valve
48.
Repair
Repair
4. Clean and inspect parts for damage. Replace
if necessary.
Note
The protrusion on the retainer plate (26h)
must point upward.
5. Reinstall the valve. Torque the screw (27) to
15-25 in-lb (1.7-2.8 N•m).
Repair
61