Graco Pro Xp 60 WB Instructions Manual page 37

4. Clean the outside of the gun with a non-flammable
solvent, as defined under
Use a soft cloth. Point the gun down to prevent
solvent from entering the gun passages. Do not
immerse the gun.
3A7504A
Flushing, page 35.
5. Remove the air cap.
6. Clean the air cap, retaining ring, and nozzle with
a soft brush and non-flammable solvent.
7. If necessary, use a toothpick or other soft tool to
clean the air cap holes. Do not use metal tools.
8. Reinstall the air cap. Tighten securely.
Maintenance
37