Graco Pro Xp 60 WB Instructions Manual page 21

3. Shut off the bleed-type air shutoff valve (AB) to
the gun.
4. Check gun resistance. Follow the steps in
Test Gun Resistance, page
5. Connect the waterborne hose. Follow the steps
in Connect the Waterborne Fluid Hose, page
6. Connect the red Graco grounded air hose
to the gun air inlet. The gun air inlet fitting
has left-hand threads. Follow the steps in
Air Supply Line, page
7. Follow the steps in
8. Follow the steps in
Check Gun Electrical Grounding, page
Reading must be less than 100 ohms.
9. Connect the exhaust tube and secure with the
clamp provided.
10. Flush if needed. Follow the steps in
Flushing, page 35.
3A7504A
39.
17.
Grounding, page 18.
32.
11. Position the air cap as needed.
12. Fully open the fan air adjustment valve (F)
counterclockwise.
16.
13. Fully open the fluid adjustment valve (H)
counterclockwise.
Gun Setup
21