Graco Pro Xp 60 WB Instructions Manual page 5

ELECTRIC ELECTRIC ELECTRIC SHOCK
This equipment must be grounded. Improper grounding, setup, or usage of the system can
cause electric shock:
• Ground all equipment, personnel, object being sprayed, and conductive objects in or close
to spray area. See Grounding
• Connect the electrostatic gun to a voltage isolation system that will discharge the system
voltage when not in use.
• All components of the isolation system that are charged to high voltage must be contained
within an isolation enclosure that prevents personnel from making contact with the high
voltage components before the system voltage is discharged.
• Follow the Fluid
the voltage; before cleaning, flushing, or servicing the system; before approaching the front of
the gun; and before opening the isolation enclosure for the isolated fluid supply.
• Do not enter a high voltage or hazardous area until all high voltage equipment has been
discharged.
• Do not touch the gun nozzle or electrode, or come within 4 in. (102 mm) of the electrode
during gun operation. Follow the Fluid
• Interlock the gun air supply with the voltage isolation system to shut off the air supply anytime
the isolation system enclosure is opened.
• Only use the red-colored Graco electrically conductive gun air hose with this gun. Do not
use black or gray-colored Graco air hoses.
• Do not splice hoses together. Install only one continuous Graco waterborne fluid hose
between the isolated fluid supply and the spray gun.
PRESSURIZED PRESSURIZED EQUIPMENT PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin
and cause serious injury.
• Follow the Pressure
cleaning, checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
3A7504A
WARNING WARNING WARNING
SHOCK HAZARD SHOCK HAZARD HAZARD
Grounding instructions.
Grounding
Fluid Voltage Voltage Discharge Discharge and
Fluid Voltage Discharge
EQUIPMENT HAZARD EQUIPMENT HAZARD HAZARD
Pressure Relief Relief Procedure Procedure when you stop spraying/dispensing and before
Pressure Relief Procedure
and Grounding Grounding Procedure Procedure when instructed to discharge
and Grounding Procedure
Fluid Voltage Voltage Discharge Discharge and
Fluid Voltage Discharge
and Grounding Grounding Procedure Procedure.
and Grounding Procedure
Warnings
5