Figure 168 Smt: Wan Configuration: Pptp; Table 76 Smt: Wan Configuration: Pptp - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User's Guide

Figure 168 SMT: WAN Configuration: PPTP

WAN Type? (D/S/P/T)
Local IP Address
Local Subnet Mask
Gateway IP Address
Server IP Address
Username
Password
Connect Setting? (C/K)
Max idle Time(Min)
Optional Setting
Connection ID/Name
PPP MTU Setting
TCP MSS setting
The following table describes the PPTP-related fields in this menu.

Table 76 SMT: WAN Configuration: PPTP

FIELD
WAN Type? (D/S/
P/T)
Local IP Address
Local Subnet
Mask
Gateway IP
Address
Server IP Address Enter the IP address of the PPTP server.
Username
Password
Connect Setting?
(C/K)
Redial Period
(Sec)
Max Idle Time
Setting
Optional Setting
Connection ID/
Name
PPP MTU Setting
221
WAN Configuration
:T
:
:
:
:
:
:
:C
:10
:
:1460
:1400
DESCRIPTION
Enter T to enable PPTP support.
Enter the (static) IP address assigned to you by your ISP for the WAN interface.
Enter the subnet mask assigned to you by your ISP (if given) for the WAN
interface.
Type the IP address of the gateway device (if given).
Enter the login user name assigned to you by your ISP.
Enter the password associated with the user name above.
Enter C (Connect on demand) when you don't want the connection up all the time
and specify an idle time-out in the Max. Idle Timeout Setting field. This is the
default selection.
Enter K (Keep alive) when you want your connection up all the time and specify the
redial time in the Redial Period field to set how long the VSG waits before trying to
bring up the connection automatically if it is disconnected.
The field is only visible when you select K in the Connect Setting field.
Type the time in seconds that elapses before the VSG automatically attempts to
reconnect to the PPTP server. The default is 30 seconds.
This field is only visible when you select C in the Connect Setting field.
Type the time in minutes that elapses before the VSG automatically disconnects
from the PPTP server. The default is 10 minutes.
If your ISP has provided a connection ID name, enter it in this field exactly as
provided.
Enter the size of a Maximum Transmission Unit (MTU).
Chapter 32 Using The SMT