VSG-1200 V2 User's Guide
Table 21 System Setting: Billing: PMS Configuration (continued)
LABEL
Spectrum MK II
Revenue Code
Description
Marriott
Revenue Code
Reference
Proprietary
Speed of PMS
Interface
Bits per second
Data bits
Parity
Stop bits
Apply
10.3 Types of Subscriber Accounts
After you have set up the subscriber authentication methods and billing profile(s), you need to
create subscriber accounts. There are two types of subscriber accounts: static and dynamic.
• For static accounts, refer to
• For dynamic accounts, refer to
93
DESCRIPTION
Enter a revenue code (between 01 and 99).
Enter a description to identify the service. For example, Internet.
Enter a revenue code (between 01 and 99).
Enter a description to identify the service. For example, Internet.
Select this option if you are using a proprietary PMS system.
Set the fields below to configure the PMS port settings on the VSG.
Note: Make sure the port settings are the same on the VSG and
the connected PMS device.
Select the speed of the PMS port connection. The default is 9600.
Specify the data bits.
Specify the parity.
Specify the data stop bits.
Click Apply to save the changes.
Chapter 11 on page
Chapter 12 on page
94.
104.
Chapter 10 Billing