Lan Configuration; Wan Configuration; Wan Mac Address; Figure 20 System Settings: Wan/Lan: Lan Configuration - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

6.4 LAN Configuration

To configure the LAN settings on the VSG, click System Settings and WAN/LAN to display
the screen as shown.

Figure 20 System Settings: WAN/LAN: LAN Configuration

The following table describes the LAN-related fields in this screen.

Table 5 System Settings: WAN/LAN: LAN Configuration

FIELD
LAN
IP Address
Subnet Mask
Note: You must restart the VSG if you change the IP address.
If you set the VSG as a DHCP server on the LAN, the VSG will automatically
change the LAN DHCP settings based on the new LAN IP address.

6.5 WAN Configuration

To configure the WAN settings on the VSG, click System Settings and WAN/LAN. The
WAN/LAN screen varies depending on the settings in the WAN Port Mode field.

6.5.1 WAN MAC Address

Use the WAN/LAN screen to configure the MAC address of the WAN port by either setting
the VSG to use the factory default or specify the MAC address of a computer on the LAN.
Chapter 6 LAN and WAN Setup
DESCRIPTION
Enter the LAN IP address of the VSG in dotted decimal notation. The default is
10.59.1.1.
Enter the LAN subnet mask in dotted decimal notation. The default is 255.0.0.0.
VSG-1200 V2 User's Guide
62