Wan Port Mode: Pptp - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

Table 8 System Settings: WAN/LAN: PPPoE (continued)
FIELD
Username
Password
PPP MTU Setting
TCP MSS Setting
Service Name
Connect on Demand Select this option when you don't want the connection up all the time and specify
Keep Alive

6.5.4 WAN Port Mode: PPTP

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet.
Chapter 6 LAN and WAN Setup
DESCRIPTION
Enter the user name exactly as assigned by your ISP.
If the name is assigned in the form user@domain where domain identifies a
service name, then enter both components exactly as given.
Enter the password associated with the user name above.
Enter the size of a Maximum Transmission Unit (MTU).
Enter the size of the Maximum Segment Size (MSS).
Enter the name of your PPPoE service.
an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the
default setting with an idle timeout of 10 minutes.
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field (maximum 65535 seconds).
When disconnected, the VSG will attempt to bring up the connection after the
redial period.
VSG-1200 V2 User's Guide
66