System Status; Figure 170 Smt: System Status; Table 78 Smt: System Status - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User's Guide
Table 77 SMT: LAN Configuration (continued)
FIELD
Relay Server IP
Address
Primary/
Secondary DNS IP
Address
At the "S)ave and return R)eturn without saving M)odify:" prompt, type S and press [ENTER] to save the
changes and return to the previous screen, type R and press [ENTER] to discard all changes and return
to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the
device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.

32.8 System Status

From the main menu, enter 4 and press [ENTER] to display the System Status menu as shown
next.

Figure 170 SMT: System Status

System Name
Doamin Name
Console Port Speed
Web Server Port
E-Mail Server Redirect
WAN Configuration
WAN Type? (D/S/P/T)
IP Address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
DHCP Configuration
DHCP Service? (D/R/S)
Press any key to return.
The following table describes the fields in this screen.

Table 78 SMT: System Status

FIELD
System Name
Domain Name
223
DESCRIPTION
This field is only visible when you enter R in the DHCP Service field.
If the VSG is set to function as a DHCP relay, enter the IP address of the DHCP
server.
These fields are visible when you enter S in the DHCP Service field.
Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or
Secondary DNS IP Address fields.
You must specify a DNS server.
System Status
:
:
:9600
:80
:
:DHCP Client
:172.21.3.66
:255.255.0.0
:172.21.0.254
:172.20.0.63
:172.20.0.27
:Disable
DESCRIPTION
This field displays the name of the VSG for identification purposes.
This field displays the domain name.
Chapter 32 Using The SMT