ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual page 114

Table 29 System Setting: Port-Location Mapping (continued)
LABEL
Batch Create
Location ID From
Port ID From
Batch Numbers
Status
Add to List
Backup/ Restore
Backup
Restore
Port-Location Mapping
List
Location ID
Port ID
Description
Status
Delete
Go .. page
First
Previous
Next
End
Chapter 13 Port-Location Mapping
DESCRIPTION
Set the related fields to create a specified number of port-location mappings.
Enter an identity (up to 20 characters) of the first location for a mapping. This
field must match the VLAN ID of a port.
Enter the an ID number (between 1 and 999999) of the starting port for this
mapping. This is the location ID number you set in the PMS.
Specify the number of port-location mappings you want to create at a time.
Select No Charge if you don't want to bill a subscriber accessing the Internet
at this port location.
Select Charge for use to bill a subscriber accessing the Internet at this port
location.
Select Blocked to stop any subscriber from accessing the Internet at this port
location.
Click Add to List to insert a new mapping rule.
You can back up or restore the port-location mappings.
Click Backup to Local PC to save the current port-location mappings to a
computer.
To back up the current port-location mapping to a TFTP server, specify the IP
address of the TFTP server and the file name in the fields provided and click
Apply.
Make sure you have previously backed up the port-location mapping.
Note: All current port-location mappings will be lost.
To restore from a local computer, specify the name and location of the backup
file or click Browse .. to locate it and click Apply.
To restore from a TFTP server, specify the IP address of the TFTP server and
the file name in the fields provided and click Apply.
This table displays a summary of each mapping rule. If applicable, click on a
heading to sort the entry.
This field displays the ID of a mapping rule.
This field displays the port ID.
This field displays a description.
This field displays the status (No Charge, Charge for use or Blocked) of a
mapping.
Click Delete All to remove all accounts.
Click Delete to remove the selected account.
Select a page number from the drop-down list box to display the selected page.
Click First to go to the first page.
Click Previous to return to the previous page.
Click Next to go to the next page.
Click End to go to the last page.
VSG-1200 V2 User's Guide
114