ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual page 118

Table 30 Advanced Setting: Credit Card (continued)
LABEL
Merchant
Password
Merchant
Transaction
Key
Payment
Gateway
Email
Additional
Information
Merchant
Name
Username and
Password
Usage Time
i Validate
Merchant ID
Terminal ID
Secure Server
Address
World Pay
Payment
Gateway
Installation ID
Currency Code Enter the code for the currency charged. For example, "USD".
Description
Test Mode
Chapter 14 Credit Card
DESCRIPTION
Select Need if a password is required for the Authroize.net account. Then enter
the password exactly as you received it from Authorize.Net in the Password field.
Then enter the transaction key exactly as you received it from Authorize.Net.
The transaction key is similar to a password. The Authorize.Net gateway uses the
transaction key to authenticate transactions.
Enter the address of the Authorize.Net gateway. The default value is "https://
cardpresent.authorize.net/gateway/transact.dll".
Note: You don't need to change this address unless instructed by
Authorize.net administrator.
Select this check box to have the VSG e-mail the subscriber the information that
you specify in the following fields.
Select this check box to have the VSG include the company name in the e-mail
that it sends to the subscriber. Enter the company name (up to 40 characters) in
the field provided.
Select this check box to have the VSG e-mail the subscriber the subscriber user
name and password.
Select this check box to have the VSG e-mail the subscriber the amount of usage
time purchased.
Select this option if you have a payment account from iValidate.
Enter the merchant ID number that you received from iValidate.
Enter the terminal ID number that you received from iValidate.
Enter the address of the iValidate gateway. The default value is "https://
silverado.trivalley.com/merchant/processcc.aspl".
Note: You don't need to change this address unless instructed by
iValidate administrator.
Select this option if you have a payment account from WorldPay.
Enter the address of the WorldPay gateway. The default value is "https://
select.worldpay.com/wcc/purchase".
Note: You don't need to change this address unless instructed by
WorldPay administrator.
Enter the payment account ID.
Enter the unique reference number assigned by WorldPay. This is the number the
VSG send to WorldPay in the payment process. You may get two WorldPay IDs,
one for testing and one for payment processing.
Enter a descriptive note about the purchase. For example, "Internet Access".
WorldPay provides you with a test account that allows you to test the credit card
processing on your site. The test account works the same as the real account
except that no funds are actually transferred. For more information, refer to the
document on the WorldPay web site.
Select Test Mode to use the account for testing purposes.
Select Success to always simulate a successful credit card transaction.
Select Fail to always simulate a failed credit card transaction.
VSG-1200 V2 User's Guide
118