Vendor Specific Attributes - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

This appendix describes the format of the vendor specific attributes supported.
Overview
With RADIUS server authentication, you can define vendor specific attributes (VSAs) in
addition to the set of standard RADIUS attributes defined in RFC 2865 and RFC 2866. A VSA
is an attribute-value pair that is sent between a RADIUS server and the VSG. It is necessary
you define the VSAs on the RADIUS sever if you want the VSG to perform any of the
additional functions listed below:
• Limit Download bandwidth per subscriber
• Limit Upload bandwidth per subscriber
• Limit Total traffic bandwidth allowed per subscriber
• Specify advertising web site per subscriber
• Enable/disable SMTP redirect
Note: Before you can make use of these functions, configure the proprietary VSAs on
the RADIUS server. Refer to the documentation that comes with your RADIUS server
for more information.
VSG-1200 V2 Supported VSAs
The following table describes the VSGs specific to the VSG-1200 V2.
Appendix D Vendor Specific Attributes

Vendor Specific Attributes

VSG-1200 V2 User's Guide
Appendix D
242