Repertory Dialing 2 - 8 - AT&T SYSTEM 25 Manual

This feature applies to multiline voice terminals only.
Repertory Dialing allows users to program telephone numbers, account codes, or feature
access codes into REP DIAL buttons (a maximum of 28 characters). The programmed
number can then be dialed by pressing REP DIAL.
For details about storing REP DIAL numbers, see the entry for "Programming Numbers"
on page 2-79.
Placing a Call Using Repertory Dialing
1
Lift the handset and listen for dial tone.
2
Press
Repertory Dialing
[REP DIAL] .
Repertory Dialing 2-87