Automatic Intercom - AT&T SYSTEM 25 Manual

This feature applies to multiline voice terminals only.
The Automatic Intercom feature allows a multiline voice terminal user to place calls to and
answer calls from another station by use of a dedicated button appearance. The Automatic
Intercom feature is usually set up between two system users who frequently call each other.
To use this feature, the AUTO ICOM button is pressed instead of dialing the other person's
PDC.
AUTO ICOM buttons are assigned to voice terminals in pairs. If a voice terminal should
have direct access to multiple stations, multiple AUTO ICOM buttons need to be assigned.
The AUTO ICOM status LED remains lit whenever the other party is off-hook. If the green
light is on next to AUTO ICOM, a busy-to-idle reminder can be activated; the user's voice
terminal will ring when the other person hangs up. To activate the busy-to-idle reminder,
the user can press AUTO ICOM while remaining on-hook. A short burst of tone is provided
when the other party hangs up. The user can then go off-hook, and the call will be placed;
the AUTO ICOM button does not have
Placing a Call Using Automatic
1
Lift the handset and
Press
2
Activating a Busy-to-Idle Reminder
1
Do not lift the handset.
2 Press
NOTE:
hangs up, and your call will be placed automatically when you lift
the handset.

Automatic Intercom

to be pressed again.
Intercom
listen for dial tone.
[AUTO ICOM]
.
[AUTO ICOM]
.
The voice terminal will ring once when the other person
Automatic Intercom 2-5