AT&T SYSTEM 25 Manual page 150

For this feature to work, a paging system must be installed on the System 25. The attendant
can then access the paging system by pressing a PAGE button or by dialing a paging access
code.
Paging zones can be dial-access restricted, so that only those with assigned Page buttons
(DSS button administered with paging access code) can access the paging system.
Paging is particularly useful when used in conjunction with Park. When users are away from
their normal phone, calls can be answered and parked by the attendant. The called party can
then be paged and told which extension to call to retrieve the parked call. The called party
can then retrieve the call from any voice terminal.
For more information on paging see the entry for "Paging" in Section 2, "Voice Terminal
Features."
Using the Paging System
1
Lift the handset and listen for dial tone.
2 Press
3
Make the announcement.
4
Hang up.
Typical Displays:
During Paging, the access code is displayed as entered.
P a g i n g
or dial the paging access code.
[PAGE]
P a g i n g 3-33