Dialing Outside Calls - AT&T Merlin II Feature Module 2 User Manual

Dialing Outside Calls

System Type
How you place calls depends on what type of MERLIN II
system you're using. Ask your administrator, then
check the appropriate box.
Outside line representation on this system is:
Square
Pooled
Placing Calls
Ask your administrator what lines or line pools are
assigned to your telephone and follow the appropriate
steps, below.
NOTE: Ask your administrator if you have to enter an
account code before you dial an outside call. If you do,
see "Forced Account Code Entry," below.
There are three types of pooled systems:
With Button Access
With Dial Access
With Automatic Route Selection (ARS)
Placing calls in a square system:
1 Lift your handset.
2 Dial 88.
You hear the outside dial tone.
3 Dial the telephone number.
Placing calls in a pooled system with Button
Access or ARS:
1 Lift your handset.
2 Dial 9.
You hear the outside dial tone.
3 Dial the telephone number.
4