Resetting The Prestige; Using The Reset Button; Navigating The Web Configurator; Figure 5 Change Password At Login - ZyXEL Communications P-660H-D Series User Manual

P-660R/H-D Series User's Guide
6 It is highly recommended you change the default password! Enter a new password
between 1 and 30 characters, retype it to confirm and click Apply; alternatively click
Ignore to proceed to the main menu if you do not want to change the password now.
Note: If you do not change the password at least once, the following screen appears
every time you log in.

Figure 5 Change Password at Login

7 You should now see the SITE MAP screen.
Note: The Prestige automatically times out after five minutes of inactivity. Simply log
back into the Prestige if this happens to you.

2.1.2 Resetting the Prestige

If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the Prestige to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the password will be
reset to "1234".

2.1.2.1 Using the Reset Button

1 Make sure the PWR/SYS LED is on (not blinking).
2 Press the RESET button for ten seconds or until the PWR/SYS LED begins to blink and
then release it. When the PWR/SYS LED begins to blink, the defaults have been restored
and the Prestige restarts.

2.1.3 Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the SITE MAP screen.
We use the P-660H-D1 web screens in this guide as an example. Screens vary slightly for
different Prestige models.
• Click Wizard Setup to begin a series of screens to configure your Prestige for the first
time.
• Click a link under Advanced Setup to configure advanced Prestige features.
45 Chapter 2 Introducing the Web Configurator