Table 130 Firewall Commands - ZyXEL Communications P-660H-D Series User Manual

P-660R/H-D Series User's Guide
Table 130 Firewall Commands (continued)
FUNCTION
Attack
363
COMMAND
config edit firewall e-mail
return-addr <e-mail address>
config edit firewall e-mail
email-to <e-mail address>
config edit firewall e-mail
policy <full | hourly | daily |
weekly>
config edit firewall e-mail
day <sunday | monday | tuesday
| wednesday | thursday | friday
| saturday>
config edit firewall e-mail
hour <0-23>
config edit firewall e-mail
minute <0-59>
config edit firewall attack
send-alert <yes | no>
config edit firewall attack
block <yes | no>
config edit firewall attack
block-minute <0-255>
config edit firewall attack
minute-high <0-255>
DESCRIPTION
This command sets the source e-mail address
of the firewall e-mails.
This command sets the e-mail address to
which the firewall e-mails are sent.
This command sets how frequently the firewall
log is sent via e-mail.
This command sets the day on which the
current firewall log is sent through e-mail if the
Prestige is set to send it on a weekly basis.
This command sets the hour when the firewall
log is sent through e- mail if the Prestige is set
to send it on an hourly, daily or weekly basis.
This command sets the minute of the hour for
the firewall log to be sent via e- mail if the
Prestige is set to send it on a hourly, daily or
weekly basis.
This command enables or disables the
immediate sending of DOS attack notification
e-mail messages.
Set this command to yes to block new traffic
after the tcp-max-incomplete threshold is
exceeded. Set it to no to delete the oldest half-
open session when traffic exceeds the tcp-
max-incomplete threshold.
This command sets the number of minutes for
new sessions to be blocked when the tcp-
max-incomplete threshold is reached. This
command is only valid when block is set to
yes.
This command sets the threshold rate of new
half-open sessions per minute where the
Prestige starts deleting old half-opened
sessions until it gets them down to the minute-
low threshold.
Appendix I Firewall Commands