Alerts; Configuring Default Firewall Policy - ZyXEL Communications P-660H-D Series User Manual

P-660R/H-D Series User's Guide
The default rule for WAN to LAN traffic blocks all incoming connections (WAN to LAN). If
you wish to allow certain WAN users to have access to your LAN, you will need to create
custom rules to allow it.

11.4.2 Alerts

Alerts are reports on events, such as attacks, that you may want to know about right away.
You can choose to generate an alert when an attack is detected in the Edit Rule screen
(select the Send Alert Message to Administrator When Matched check box) or when a
rule is matched in the Edit Rule screen. When an event generates an alert, a message can
be immediately sent to an e-mail account that you specify in the Log Settings screen (see
the chapter on logs).

11.5 Configuring Default Firewall Policy

Click Firewall and then Default Policy to display the following screen. Activate the
firewall by selecting the Enable Firewall check box as seen in the following screen.
Refer to Section 10.1 on page 98
115
for more information.
Chapter 11 Firewall Configuration