Chapter 27 Enabling The Firewall; Remote Management And The Firewall; Access Methods; Enabling The Firewall - ZyXEL Communications P-660H-D Series User Manual

This chapter shows you how to get started with the Prestige firewall. This chapter applies to
the P-660H-D.

27.1 Remote Management and the Firewall

When SMT menu 24.11 is configured to allow management and the firewall is enabled:
• The firewall blocks remote management from the WAN unless you configure a firewall
rule to allow it.
• The firewall allows remote management from the LAN.

27.2 Access Methods

The web configurator is, by far, the most comprehensive firewall configuration tool your
Prestige has to offer. For this reason, it is recommended that you configure your firewall using
the web configurator, see the following chapters for instructions. SMT screens allow you to
activate the firewall and view firewall logs.
27.3

Enabling the Firewall

From the main menu enter 21 to go to Menu 21 - Filter Set and Firewall Configuration to
display the screen shown next.
Enter option 2 in this menu to bring up the following screen. Press [SPACE BAR] and then
[ENTER] to select Yes in the Active field to activate the firewall. The firewall must be active
to protect against Denial of Service (DoS) attacks. Additional rules may be configured using
the web configurator.

Chapter 27 Enabling the Firewall

C
H A P T E R
Enabling the Firewall
P-660R/H-D Series User's Guide
2 7
246