ZyXEL Communications P-660H-D Series User Manual page 48

P-660R/H-D Series User's Guide
Table 4 Web Configurator Screens Summary (continued)
LINK
Firewall
(P-660H-D only)
Content Filter
(P-660H-D only)
Remote
Management
UPnP
Logs
(P-660H-D only)
Media Bandwidth
Management
(P-660H-D only)
Maintenance
System Status
DHCP Table
Any IP Table
Diagnostic
Firmware
LOGOUT
47
SUB-LINK FUNCTION
Default Policy Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rule Summary This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Keyword Use this screen to block sites containing certain keywords in the
URL.
Schedule Use this screen to set the days and times for the Prestige to
perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your Prestige.
Use this screen to configure through which interface(s) and
from which IP address(es) users can use Telnet/FTP/Web to
manage the Prestige.
Use this screen to enable UPnP on the Prestige.
Log Settings Use this screen to change your Prestige's log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Summary Use this screen to assign bandwidth limits to specific types of
traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
This screen contains administrative and system-related
information.
This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Use this screen to view the IP and MAC addresses of LAN
computers communicating with the Prestige.
General These screens display information to help you identify problems
with the Prestige general connection.
DSL Line These screens display information to help you identify problems
with the DSL line.
Use this screen to upload firmware to your Prestige
Click Logout to exit the web configurator.
Chapter 2 Introducing the Web Configurator