Figure 200 Example Of Ip Policy Routing; Figure 201 Ip Routing Policy Example - ZyXEL Communications P-660H-D Series User Manual

Route 1 represents the default IP route and route 2 represents the configured IP route.

Figure 200 Example of IP Policy Routing

To force packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be
routed to the Internet via the WAN port of the Prestige, follow the steps as shown next.
1 Create a routing policy set in menu 25.
2 Create a rule for this set in Menu 25.1.1 - IP Routing Policy as shown next.

Figure 201 IP Routing Policy Example

Chapter 34 IP Policy Routing
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway type = Gateway addr
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
P-660R/H-D Series User's Guide
Packet length= 10
Len Comp= Equal
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Gateway addr = 192.168.1.1
Gateway node = 0
Log= No
304