Advance Setup Options; Figure 121 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation; Figure 122 Menu 11.1 Remote Node Profile - ZyXEL Communications P-660H-D Series User Manual

Figure 121 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The
valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local
management of ATM traffic).

23.5.3 Advance Setup Options

In menu 11.1, select PPPoE in the Encapsulation field.

Figure 122 Menu 11.1 Remote Node Profile

Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name=
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login= ?
My Password= ?
Authen= CHAP/PAP
Move the cursor to the Edit Advance Options field, press [SPACE BAR] to select Yes, then
press [ENTER] to display Menu 11.8 – Advance Setup Options.
Chapter 23 Remote Node Configuration
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
ENTER here to CONFIRM or ESC to CANCEL:
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
P-660R/H-D Series User's Guide
VPI #= 0
VCI #= 38
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= Yes
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 0
220