Configuring Firewall Rules - ZyXEL Communications P-660H-D Series User Manual

Table 33 Rule Summary (continued)
LABEL
Service
Action
Schedule
Log
Alert
Insert/Append
Move
Back
Apply
Cancel

11.6.1 Configuring Firewall Rules

Refer to Section 10.1 on page 98
Follow these directions to create a new rule.
1 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type "6", your new rule becomes number 6 and the previous rule 6 (if
there is one) becomes rule 7.
2 Click Insert to display this screen and refer to the following table for information on the
labels.
Chapter 11 Firewall Configuration
DESCRIPTION
This drop-down list box displays the services to which this firewall rule applies.
Please note that a blank service type is equivalent to Any. See
page 126 for more information.
This is the specified action for that rule, either Block or Forward. Note that Block
means the firewall silently discards the packet.
This field tells you whether a schedule is specified (Yes) or not (No).
This field shows you whether a log is created when packets match this rule (Enable)
or not (Disable).
This field tells you whether this rule generates an alert (Yes) or not (No) when the
rule is matched.
Type the index number for where you want to put a rule. For example, if you type "6",
your new rule becomes number 6 and the previous rule 6 (if there is one) becomes
rule 7.
Click Insert to add a new firewall rule before the specified index number.
Click Append to add a new firewall rule after the specified index number.
Type a rule's index number and the number for where you want to put that rule. Click
Move to move the rule to the number that you typed. The ordering of your rules is
important as they are applied in order of their numbering.
Click Back to return to the previous screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
for more information.
P-660R/H-D Series User's Guide
Section 11.10 on
118